Page tree
Skip to end of metadata
Go to start of metadata

Where To Find This Example

Select Help > Open Examples... from the menus and type either the example name listed above or one of the keywords below.

Or in Version 13 or higher you can open the project directly from this page using this button. Make sure to select the Enable Guided Help before clicking this button.

Design Notes

Frequency Multiplier

This project shows how to use a SPUR vector in FMULT_B2. The element help for this block is quite extensive and a good place to begin to understand how this block works. The example system diagrams are just illustrative examples and are self explanitory.

In each case the zero term in the SPUR vector indicates the xN of the signal of interest. The values in the vector preceeding and following the zero value apply to the other harmonics of the signal.

System Diagram - x8

System Diagram - x32

System Diagram - x16

Graph - x8 Spectrum

Graph - x16 Spectrum

Graph - x32 Spectrum