Page tree
Skip to end of metadata
Go to start of metadata

Where To Find This Example

Select Help > Open Examples... from the menus and type either the example name listed above or one of the keywords below.

Or in Version 13 or higher you can open the project directly from this page using this button. Make sure to select the Enable Guided Help before clicking this button.

Design Notes


This project shows the generation of a convolutional encoded 8PSK signal using standard VSS blocks as well as the generation of the same signal using the VSS MATLAB® co-simulation block.

This co-simulation makes use of the MATLAB Communications Tool Box.

When you start the simulation VSS will automatically start  and its icon will appear on the bottom tool bar.

The VSS MATLAB co-simulation block can be dependent on an "m-file" or a MATLAB command line.

The VSS MATLAB block allows the user to define the parameters of the m-file, and the output signals to be monitored in VSS.

The graphs show that the data generated in MATLAB agrees one for one with that generated in VSS.

Note: MATLAB is a registered trademark of The MathWorks Inc.