Page tree
Skip to end of metadata
Go to start of metadata

Where To Find This Example

Select Help > Open Examples... from the menus and type either the example name listed above or one of the keywords below.

Or in Version 13 or higher you can open the project directly from this page using this button. Make sure to select the Enable Guided Help before clicking this button.

Design Notes


This is a simple VSS MATLAB® co-simulation example.

It makes use of the VSS four input MATLAB co-simulation block. The block uses a command line to add the two input signals and another command line to multiply the two signals.

Note: MATLAB is a registered trademark of The MathWorks Inc.