Where To Find This Example
Select Help > Open Examples... from the menus and type either the example name listed above or one of the keywords below.
Or in Version 13 or higher you can open the project directly from this page using this button. Make sure to select the Enable Guided Help before clicking this button.
Uplink WCDMA Signal Source:
This project implements an uplink WCDMA signal source according to ETSI TS 125 141 V6.11.0 (2005-09) Technical Specification. The WCDMA source is configured as a 12.2 kbps UL reference measurement channel as defined in Annex A.2.
The WCDMA source may be configured by setting appropriate parameters in the Global Definitions window. These parameters, which are boxed for easy access, are:
OutPowerLevel_dBm: Output Power Level (dBm)
CarrierFreq_MHz: Carrier Frequency (MHz)
The value of samples/symbol may be changed by clicking on the Options/Default System Options in the Menu bar, then changing the Oversampling (_SMPSYM) parameter in the Simulator tab.
The following parameters are defined in the HSDPA specification document mentioned above and, in most cases, should not be changed:
CodeD: Channelization code ID (data)
CodeC: Channelization code ID (control)
LevelDPDCH: Relative level of DPDCH (dBm)
LevelDPCCH: Relative level of DCDCH (dBm)