This video is located in the E-Learning repository, not in KnowledgeBase.
To get to E-Learning, please login on the E-Learning (Overview) page:
(You can also get to E-Learning by going to the Support Resources tab in the the top menu-bar of the AWR website.)
This five-part video demonstrates how to run Analyst™ 3D finite element method (FEM) EM simulator within Microwave Office software.
- Part 1 - tells you some of the things for which the simulator is used and explains how a package is used, bond wires included, and simulation set up in the software. You’ll start a new project with a STACKUP and elements from libraries.
- Part 2 - covers how to draw 3D cells and you’ll be walked through a coil example starting in Part 2 and continuing in Part 3.
- Part 3 - You’ll check mesh connectivity and learn how to correct before simulating. The use of simulated data sets is demonstrated, and the results of the simulation are discussed.
- Part 4 - shows some of the advanced features of Analyst, including how to use extrusion for 2D layout. An example is shown with upward extrusion. Part 5 describes how to extrude downward and addresses precedence rules for materials.
The entire video is approximately 1 hour in length.
This video appears in the E-Learning table of contents as:
New users and/or Core Curriculum - Analyst Overview.