To run this script
Select Script → Schematic → TurnOFF_Element_Display from the Menus.
Or in Version 13 or higher you can run the utility directly from this page using this button.
This is a simple script to turn off schematic element display for model names and IDs. Many times you know what the model is from the symbol and you don't want this extra information cluttering your schematic.
Below is an example with the full schematic display:
Below is the display after the script is run.
Note: you will have to redraw the schematic (zoom in our out) to redraw to see the change.
There are two accompanying scripts, one will turn the display on and the other will toggle the display (turn on if they are off or turn off if they are on).