...
Or in Version 13 or higher you can open the project directly from this page using this button. Make sure to select the Enable Guided Help before clicking this button.
HTML |
---|
<script src="https://s3.amazonaws.com/downloads.awrcorp.com/gh/ghcommon.bas" type="text/awrscript"> </script> <button class="gh-button gh-projectopen" onclick="runAwrScript('awrGhOpenProject','DigitalAM_BER.emp')">Open Install Example</button> |
Design Notes
Digital AM System
This project demonstrates a system that uses conventional AM modulation for transmission of digital data.
...
The "Flat AM" system diagram implements the digital AM transmitter and receiver out of discrete VSS components.
The "Nested AM" system diagram uses DIG_AM_TX and DIG_AM_RX blocks for the digital AM transmitter and receiver, respectively. Subcircuit "AM Modulator" has the same internal structure as DIG_AM_TX and subcircuit "AM Demodulator" the same as DIG_AM_RX.
...
The carrier frequency and AM modulation index are set in the "Global Definitions" window. You can tune the modulation index by clicking on the "Tune" button and sliding the ruler to the desired level. Its effect on the BER can be observed.
...