Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Download the Wizard using the button above.

  2. Find the AWR Projects folder by choosing Help > Show Files/Directories and double-clicking on Projects



  3. Copy the zip file to the AWR Projects directory and unzip it
  4. Browse the Wizards folder in the unzipped PCB_EM_Setup folder, right click on both DLLs and choose Properties.
    1. Check to see if there is a "Security" section on the bottom of the "General" tab and if there is check the "Unblock" checkbox
    2. If the above General tab does not contain the Unblock selection, please run the following PowerShell command
      1. unblock-file -path "FULL PATH TO PCB EM SETUP.dll"
      2. reference to the https://docs.microsoft.com/en-us/powershell/module/microsoft.powershell.utility/unblock-file?view=powershell-6
  5. Register the PCB EM Setup Wizard with Microwave Office by choosing File > New with Library > Browse and then browsing to the INI file in the PCB EM Setup folder in your AWR Projects directory.
    1. The PDK can be added to new projects by choosing File > New with Library and choosing PCB EM Setup from the list.
    2. The PDK can be added to existing projects by choosing Project > Process Library > Add/Remove Library > Add button and choosing PCB EM Setup from the list
  6. Run the PCB EM Setup wizard by double-clicking PCB EM Setup in the Wizards node

...