Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Where To Find This Script

You can run this script by clicking on Scripts->Schematic->

Awr script page macro
FunctionNameEnable_Remove_Short
from AWRDE menu.
ScriptPathScript → Schematic → Enable_Remove_Short
ButtonLabelRun Script
ModuleNameEnable_Remove_Short

Description

This script requires the user to first select models in a schematic or system diagram that had all nodes shorted. When the script is run, all models selected will be enabled and all wires shorting the nodes are removed. The "disable_and_short" does the opposite, so these are typically used together. These scripts are easiest to use if they are assigned to hotkeys.

For example, see the schematic with two models that were shorted are selected.

Image Modified

After the script is run, the schematic will look like below.

Image Modified

The Disable and Short Element script does the opposite command.