Page tree

Versions Compared


  • This line was added.
  • This line was removed.
  • Formatting was changed.

Where To Find This Example

Select Help > Open Examples... from the menus and type either the example name listed above or one of the keywords below.

Or in Version 13 or higher you can open the project directly from this page using this button.


<script src=""
<button class="gh-button gh-projectopen" onclick="runAwrScript('awrGhOpenProject','FET_Characterization.emp')">Open Install Example</button>


- Second, do load pull analysis. Look at the "Load Pull Output" plot and move marker to the proper frequency (easiest to use search for marker) on the s22 conjugate measurement. The marker shows the magnitude and angle of the reflection coefficient for S22. The approximate output match is this impedance just to make sure the load pull is close to this (a sanity check). Next, select "Scripts > Global Scripts Load Pull > Load Pull" from the menus. All of the default settings are correct for this example. Once load pull is done, set the magnitude and angle for the output tuner to the values on the marker on the maximum value.


This project uses an example process design kit. If you are using your own device model and do not want this PDK in the project you can remove it. From the menus, select "Project > Process Library > Add/Remove Library". From the dialog that comes up, select the library you dont want and click the "Remove" button.

Schematic - IV

Image Modified

Schematic - Display_Network_Analyzer

Image Modified

Schematic - Display_Load_Pull

Image Modified

Schematic - Display_All_Linear

Image Modified