HTML |
---|
<!-- solves support problem. List of OS support needs to be reviewed and kept up to date--> |
Problem
Dialog boxes in the AWR Design Environment are cut off and not all the information is displayed.
Version and Product
All Versions
All Products
Solution
The Windows system font setting on your computer can cause this problem and changing this font setting will correct the problem. Some common symptoms of this problem can be seen if you double click on any model in Microwave Office or VSS, the Element Options dialog box will open. You need to change your font if the bottom of this dialog box does not appear or is cut off. The bottom of the box should display three items.
Element Enable check box.
Part Number text box.
The Show Secondary push button.
We have also seen cases where the Add Measurement or Modify Measurement dialog boxes do not display the proper controls on the right hand side.
In this case, you should make your Windows font smaller. If you notice the right side of the dialog box is cut off, you should make your Windows font bigger.
On Windows XP, we have found seen cases where To change the windows font is set properly but the display is still wrong. To fix it the user chooses a new font and then reset it to the original setting and this fixed the problem. on Windows 10:
- Click the Start button and open Control Panel
- Click Display
- Click set custom scaling level
- Adjust scaling size until dialog shows the correct controls and text.
To change the windows font on Windows 7 and 8 :
Click the Start button and choose open Control Panel.
Select Appearance and Personalization.
Under Display choose Make make text and other items larger or smaller.
Then set this back to Smaller smaller - 100% (default).
To change the windows font on Windows XP :
Right click on your desktop and select Properties.
Select the Appearance Tab.
In the Font Size drop down box, select something other than Normal.
Then set this back to Normal.
To change the windows font on Windows 2000:
Right click on your desktop and select Properties.
Select the Settings Tab.
Push the Advanced Button
In the Font Size drop down box, select something other than Normal.
Then set this back to Normal.