Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Where To Find This Script

You can run this script by clicking on Scripts->Schematic-> Enable_Remove_Short from AWRDE menu.


This script requires the user to first select models in a schematic that had all nodes shorted. When the script is run, all models selected will be enabled and all wires shorting the nodes are removed. The "disable_and_short" does the opposite, so these are typically used together. These scripts are easiest to use if they are assigned to hotkeys.

For example, see the schematic with two models that were shorted are selected.

After the script is run, the schematic will look like below.

  • No labels