Page tree
Skip to end of metadata
Go to start of metadata

Where To Find This Example

AWR Version 15

Understanding AWR .emz Files

AWR Version 14

Understanding AWR .emz Files

Design Notes

Filter s21 vs f-fo script.emp

Whereas Microwave Office plots frequency f as the x-axis, in some applications, like filters, it may be required to plot a response as a function of f/fo on the x-axis. This project plots S21 as a function of normalized frequency f/fo by using output equations for a simple behavioral filter.

Overview

In order to plot S21 with a modified x-axis of f/fo, this project calculates f/fo x-axis points with output equations. Output equation pulls out the S21 data from the graph, pulls the simulation frequencies using the swpvals variable, sets fo=7GHz, and calculates f/fo. The graph "S21 vs norm f" uses an output equation to plot the S21 against the new x-axis.

Output Equations

The variable _FREQ makes the simulation frequency available as a variable withing Microwave Office. In the output equations _FREQ is divided by the chosen center frequency for the example, fo, in order to generate the normalized frequency "fnew" for the new x-axis. The S-parameter data is captured into a variable by the equation statement S21 = Schematic 1: DB(|S[2,1]|).

Graph on New X-Axis

The graph "S21 vs norm f" plots S21 on the "fnew" axis of f/fo. The measurement uses an output equation result

Schematic - Filter

Graph - S11 and S21

Graph - S21 vs norm f