The procedure for requesting AWR support has changed. Please read all about
the new AWR product support process.
This test bench project can be used to measure the performance of RF components or sub-systems designed for 5G NR Downlink receivers.
This test bench includes:
System Diagrams:
5G_NR_DL_RX_Testbench - the test bench setup. The specific DUT design may be added as a sub-circuit (system diagram) or linked via the NL_S block (circuit schematic)
- 5G_NR_DL_RX_Testbench_Display - embeds all graphs into one display
Graphs
- BER: Measured BER vs. the signal power level.
- Throughput: Throughput measured at the receiver. Calculated based on the measured block error rate.
- IQ Constellation: Normalized IQ constellations of data and control channels. Reference IQ is also shown for comparison.
- Spectrum: Signal spectrum measured at the input and output of the DUT.
Project Folders
- 5G_NR_UL_RX_Testbench - Folder containing all the system diagrams and graphs for this project.
Importing the Test Bench
If you are unable to import the test bench automatically by clicking the Import test bench button above, click Here to do that manually.