The procedure for requesting AWR support has changed. Please read all about the new AWR product support process.
Page tree
Skip to end of metadata
Go to start of metadata

To run this script

Select Scripts > Netlist >Netlist_AWR_Schematic from the Menus.

Or, in versions that support the script, you can run the utility directly from this page using this button.


This script creates a netlist file and a log file from the schematic picked by user. AWR did not write this script for any specific application, it is just a general purpose script.

Note: Subcircuits that are EM structures or Data Files are written in the netlist but a subcircuit is not created for them. A warning is written into the netlist.

Here is example of a schematic with three subcircuits, one is data file and the other two are schematics:

After running the script, the user will pick the schematic and location to save the resulting netlist file:

Here is what resulting netlist will look like. Notice the warning message because of datafile subcircuit.