The procedure for requesting AWR support has changed. Please read all about the new AWR product support process.
Page tree
Skip to end of metadata
Go to start of metadata

This video is located in the E-Learning repository, not in KnowledgeBase.

To get to E-Learning, please login on the E-Learning (Overview) page:

E-Learning Login

(You can also get to E-Learning by going to the Support Resources tab in the the top menu-bar of the AWR website.)

This five-part video demonstrates how to run Analyst™ 3D finite element method (FEM) EM simulator within Microwave Office software.

  • Part 1 - tells you some of the things for which the simulator is used and explains how a package is used, bond wires included, and simulation set up in the software. You’ll start a new project with a STACKUP and elements from libraries.
  • Part 2 - covers how to draw 3D cells and you’ll be walked through a coil example starting in Part 2 and continuing in Part 3.
  • Part 3 - You’ll check mesh connectivity and learn how to correct before simulating. The use of simulated data sets is demonstrated, and the results of the simulation are discussed.
  • Part 4 - shows some of the advanced features of Analyst, including how to use extrusion for 2D layout. An example is shown with upward extrusion. Part 5 describes how to extrude downward and addresses precedence rules for materials.

The entire video is approximately 1 hour in length.

This video appears in the E-Learning table of contents as:

New users and/or Core Curriculum - Analyst Overview.