The procedure for requesting AWR support has changed. Please read all about the new AWR product support process.
Page tree
Skip to end of metadata
Go to start of metadata

Where To Find This Example

AWR Version 15

Select Help > Open Examples... from the menus and type either the example name listed above or one of the keywords below.

Or you can open the project directly from this page using this button. Make sure to select the Enable Guided Help before clicking this button.

AWR Version 14

This example is not available for AWR Version 14 or earlier.

Design Notes

NR-FR2-TM3.1 Testbench

This project demonstrates NR 5G transmitter and receiver configured for Test Model 3.1 as defined in 3GPP TS 38.141 Section 4.9.2.

Subcarrier spacing (SCS) of 60kHz and 120kHz is supported for FR2 test models, according to the specifications.

This test model is used for:

- Output power dynamics

- Total power dynamic range (upper OFDM symbol power limit at max power with all 64QAM PRBs allocated)

- Transmitted signal quality

- Frequency error

- EVM for 64QAM modulation (at max power)

Note: EVM shall be evaluated over PDSCH allocated PRBs with nRNTI=0 and nRNTI=2.