The procedure for requesting AWR support has changed. Please read all about the new AWR product support process.
Page tree
Skip to end of metadata
Go to start of metadata

Where To Find This Example
Download Project

Understanding AWR .emz Files

Design Notes

Quick Notes

Linear Temperature - sweeping temperature of resistor and looking at noise figure. Very simple.

Nonlinear Temperature Schematic - Sweeping _TEMP as a passed parameter into the model.

Linear and Nonlinear Temperature Schematic - Sweeping both linear and nonlinear noise with _TEMP and _TEMPK and passing down _TEMP as a passed parameter. Note, if you disable the _TEMPK=ctok(_TEMP), the noise performance will change because the resistor noise doesn't sweep. If you go into the device model and change the temperature setting from _TEMP to 25, it will only sweep the resistor noise temperature with device temperature fixed.

Nonlinear Temperature Netlist - Showing how to sweep temperature on the netlist model.