...
Reading and setting default system options in Options > Default System Options. Exception is frequencies under the RF Frequencies tab, for that refer to this link.
Reading system options:
| Code Block |
|---|
|
sys_options_dict = Project.system_options_dict
for option_name, option_value in sys_options_dict.items():
print(option_name,' : ', option_value)
#end for |
...
| Expand |
|---|
| Code Block |
|---|
| SampleRate : 8
DataBlockSize : 100
StopTime : 0.0
TimeFrame : 1e-09
OutputBufferSize : 10000
DefaultImpedance : 50.0
SysIncludeRFMismatch : False
SysAmbientTemp : 290.0
SysAnnotationSigDigits : 6
SysRFNoiseMode : 2
SysRFBMeasThermalNoiseUse : 0
SysTDMeasThermalNoiseUse : 0
SysMultithreadRFB : 1
SysExtrapolateCoSimFreqs : 1
SysMultithreadRFI : 1
SysMultithreadTDBlock : 1
SysMultithreadTDTopLevel : 1
SamplesPerMeasurement : 1000000
NormalizeToTimeUnits : False
WaveFormsStartFromZero : False
AlignWaveFormsToData : False
VSS_SamplingFreq : 7999999999.999999
VSS_OversamplingRate : 8
VSS_BlockSize : 100
VSS_UseSimStopTime : 0
VSS_SimStopTime : 0.0
VSS_MaxNodeDataAccumulation : 10000
VSS_MismatchModeling : 0
VSS_Impedance : 50.0
VSS_AmbientTemperature : 290.0
VSS_AnnotationSigDigits : 6
VSS_LowMemoryThresholdMB : 500
VSS_RF_NoiseModeling : 2
VSS_MeasNoiseFloorTemperature : 290.0
RFB_MeasThermalNoiseFloorUse : 0
VSS_TD_MeasSpectrumNoiseFloorUse : 0
VSS_DirectUpConversionGainType : 0
VSS_CosimS11UseRFB : 0
VSS_CosimS11UseRFI : 0
VSS_CosimS11UseTD : 1
VSS_NonlinearSaturationModel : 1
VSS_NLAmpFilterImpl : 0
VSS_AutoRFLinearFreqInterp : 0
VSS_FMULT_Bx_AutoCOMPATMODE : 1
RFI_AMP_MaxSelfGenDepth : 2
RFI_MIXER_MaxSelfGenDepth : 2
VSS_RFB_UseMultiCore : 1
VSS_RFI_UseMultiCore : 1
VSS_TD_Block_UseMultiCore : 1
VSS_ExtrapolateCoSimFreqs : 1
VSS_TD_TopLevel_UseMultiCore : 1
VSS_MaxMeasBufferSize : 1000000
VSS_NormalizeWaveformsToSymbols : 0
VSS_WaveformsXAxisFrom0 : 0
VSS_AlignToDataStart : 0
RFI_UseHarmonicBand : 1
RFI_HarmonicBand : 2
RFI_UseFreqAboveFc : 0
RFI_FreqAboveFc : 5000000000.0
RFI_UseFreqBelowFc : 0
RFI_FreqBelowFc : 5000000000.0
RFI_UseMaxFreq : 0
RFI_MaxFreq : 10000000000.0
RFI_UseMinFreq : 0
RFI_MinFreq : 0.0
RFI_UseDBBelowNoise : 1
RFI_DBBelowNoise : 10.0
RFI_UseMinDBm_Hz : 0
RFI_MinDBm_Hz : -184.0
RFI_UseMinDBV_sqrtHz : 0
RFI_MinDBV_sqrtHz : -194.0
RFI_UseMaxHarmonic : 0
RFI_MaxHarmonic : 4
RFI_UseMaxComponents : 0
RFI_MaxComponents : 50
RFI_UseMaxContributionsTracked : 0
RFI_MaxContributionsTracked : 20
RFI_AmpsSuppressDC : 1
RFI_MixersSuppressDC : 0
RFA_MaxIterations : 50
RFA_MinChangeInDB : 0.02
RFA_IterationZeroTolerance : 1e-12
RFA_MaxControlLoopIterations : 1000
RFB_NoiseSamplePoints : 3
VSS_RBW_NFFT_Use : 0
VSS_RBW : 1000000.0
VSS_NFFT : 1000
VSS_VBW_NAVG_Use : 0
VSS_VBW : 1000000.0
VSS_NAVG : 10
VSS_PhaseThreshold : -150.0
VSS_PWR_MTR_RMS_Peak : 0
VSS_PWR_SPEC_RMS_Peak : 0 |
|
Setting
...
system options:
The following shows how to modify a single project option and then write the project options to AWRDE
...
