The procedure for requesting AWR support has changed. Please read all about
the new AWR product support process.
...
For the amplifier of interest, gather the data which typically originates from the manufacturer. In this example, S-parameters and Noise Figure at 25 deg C and 85 deg C are to be used in the creation of the AMP_F file. So two .s2p (Touchstone formatted S-parameters) files will be required as well as a screenshot of noise figure vs. frequency saved as a compatible image file is also required. See this link for details on preparing the data.
Data used in this example can be found in this link.
Start the MakeAMP_F.py Script
...